Spuhr ISMS SP-4016 34mm 0MOA 38mm One-Piece Cantilever Picatinny Mount
- Precision machined from a single billet of 7075 T651 aluminium with a minimum of seven interfaces to attach various accessories directly to the mount such as ACI, red-dot, etc.
- Built in bubble level to assist with holding the rifle level enhancing long range shooting.
- 45 degree split of the rings gives better view of the parallax and windage adjustments and the flat contour of the rings make low profile turrets easier to read.
- Index markings on the rear ring allow for a quick visual check of the settings on the turrets.
- Extremely robust scope mount, designed to prevent damage to the scope from flexing under heavy recoil or rough handling.
- Rings are grooved inside to ensure firm grip of the scope and enables gluing if desired.
- Scope levelling tool supplied with each mount. Vital as if the scope is not level, diagonal deviation will occur when elevation is adjusted.
Spuhr ISMS SP-4016 34mm 0MOA 38mm One-Piece Cantilever Picatinny Mount
The IDEAL SCOPE MOUNT SYSTEM series of mounts feature seven set of interfaces to
attach any of more than 40 different accessories, and has a bubble level
integrated in the rear plane of the mountbody to prevent canting of the rifle.
The rings are diagonally cut for increased visibility of the elevation and windage turrets (US Patent 8,733,011).
The mounts are machined from billet 7075 T651 aluminum and all aluminum parts are hardcoat anodized.
The Torx 20 ring and clamping screws are zinc-nickel coated for corrosion resistance.
The screws come pre-waxed from the factory to ensure proper torque values.
The mount is shipped with a manual and a “wedge” leveling key.
NOTE:
The SP-4016 is designed for use on AR10-style rifles with MIL-STD-1913 or STANAG 4694 rails, and has an absolute co-witness with back-up iron sights. The SP-4016 will fit most 34 mm scope tubes except for scopes with extended erector housings, such as the US Optics TPAL/EREK and Nightforce BEAST.
Spuhr ISMS SP-4016 34mm 0MOA 38mm One-Piece Cantilever Picatinny Mount
0 MIL/0 MOA
Height: 38 mm/1.5”
Length: 150 mm/5.9”
Weight: 252 g/8.9 oz
Spuhr ISMS SP-4016 34mm 0MOA 38mm One-Piece Cantilever Picatinny Mount
-
Precision machined from a single billet of 7075 T651 aluminium with a minimum of seven interfaces to attach various accessories directly to the mount such as ACI, red-dot, etc.
-
Built in bubble level to assist with holding the rifle level enhancing long range shooting.
-
45 degree split of the rings gives better view of the parallax and windage adjustments and the flat contour of the rings make low profile turrets easier to read.
-
Index markings on the rear ring allow for a quick visual check of the settings on the turrets.
-
Extremely robust scope mount, designed to prevent damage to the scope from flexing under heavy recoil or rough handling.
-
Rings are grooved inside to ensure firm grip of the scope and enables gluing if desired.
-
Scope levelling tool supplied with each mount. Vital as if the scope is not level, diagonal deviation will occur when elevation is adjusted.
PRODUCT DELIVERY CMS BLOCK WITH IDENTIFIER: 'product_deliverytab;
Sed ut perspiciatis unde omnis iste natus error sit voluptatem accusantium doloremque laudantium, totam rem aperiam, eaque ipsa quae ab illo inventore veritatis et quasi architecto beatae vitae dicta sunt explicabo. Nemo enim ipsam voluptatem quia voluptas sit aspernatur aut odit aut fugit, sed quia consequuntur magni dolores eos qui ratione voluptatem sequi nesciunt. Neque porro quisquam est, qui dolorem ipsum quia dolor sit amet, consectetur, adipisci velit, sed quia non numquam eius modi tempora incidunt ut labore et dolore magnam aliquam quaerat voluptatem. Ut enim ad minima veniam, quis nostrum exercitationem ullam corporis suscipit laboriosam, nisi ut aliquid ex ea commodi consequatur? Quis autem vel eum iure reprehenderit qui in ea voluptate velit esse quam nihil molestiae consequatur, vel illum qui dolorem eum fugiat quo voluptas nulla pariatur.